62
Modifying a Drum Kit
Determine the “Location” Where the
Drums are to be Played (AMBIENCE)
You can choose different environments where you play the drums.
Here, let’s try editing the Ambience setting.
First, follow the procedures described in “Turning Effects On
and Off” (p. 50) to turn back on the Ambience turned off when
the instrument was selected.
When [KIT] → [F3 ( MENU)] → [FX SW] is selected, the settings screen
appears.
fig.Q4-055
1
Follow the procedures described in “Choosing Drum Kits” (p. 44) to
select the drum kit to be edited.
Here, select the Drum Kit 1, “V Custom.”
The “DRUM KIT” screen appears.
fig.Q4-056
2
Press [F2 (STUDIO)].
The “STUDIO” screen appears.
fig.Q4-057
Turning Ambience switch
off removes the Ambience
without influencing any of
the other settings. Before
using the Ambience, check
to make sure that the
switch is set to “ON”.
1, 5
1
4
2 3
To Next Page
Loading...
