61
Modifying a Drum Kit
Quick Start
5
Press [F2 (MUFFLE)].
The “MUFFLE” screen appears.
fig.Q4-044
6
Press
CURSOR
[ ] to move the cursor to “MUFFLING.”
7
Press [INC/+] or [DEC/-] or rotate the VALUE dial to select the
type of muffling.
Here, select “DOUGHNUTS2.” The shell resonance is reduced, resulting in
a more closed sound.
fig.Q4-046
This completes the muffling settings. Next, adjust the strainer tension.
8
Press CURSOR [ ] to move the cursor to “STRAINER ADJ.”
9
Press [INC/+] or [DEC/-] or rotate the VALUE dial to adjust the
strainer tension.
Here, select “LOOSE” and compare the difference in sound.
fig.Q4-048
10
Press [KIT].
The “DRUM KIT” screen appears.
fig.Q4-048a
In the “MUFFLE” screen,
you can select the muffling
method and set the strainer
tension.
To Next Page
Loading...
