Roland V-Drums TD-8 - Adjusting the Volume Balance of the Instruments [MIXER]

64
Modifying a Drum Kit
Adjusting the Volume Balance of the
Instruments [MIXER]
fig.Q4-060
1
Follow the procedures described in “Choosing Drum Kits” (p. 44) to
select the drum kit to be edited.
Here, select the Drum Kit 1, “V Custom.”
The “DRUM KIT” screen appears.
fig.Q4-059a
2
Set each of the [GROUP FADERS] sliders [KICK], [SNARE], [HI-
HAT], [TOMS], [CYMBALS], and [OTHERS] to the same volume.
Here, you should raise the volume to the maximum level.
3
Press [MIXER].
[MIXER] lights, and the “MIXER” screen appears.
fig.Q4-061
2
1
6
3 1, 7
5
The [GROUP FADERS]
functions are switched by
pressing the [FADERS]
b
utton. For details on using
this, refer to p. 21.