65
Modifying a Drum Kit
Quick Start
4
Strike the pad being used for the snare.
The snare settings screen appears.
fig.Q4-062
5
Press CURSOR [ ] to move the cursor to “LEVEL.”
6
Press [INC/+] or [DEC/-] or rotate the VALUE dial to adjust the
volume.
7
Press [KIT].
The “DRUM KIT” screen appears.
fig.Q4-063a
You can also select the pad
with [TRIG SELECT].
When setting the volume,
make sure that [GROUP
FADERS] are all at the
same level. Using this
method allows you to
reproduce the same
alance merely by selecting
that kit. The group faders
should be used for making
temporary adjustments to
the volume.
Adjustments to the GROUP
FADERS have no effect on
settings in the mixer screen.
These settings can be made
for each individual drum
kit.
To Next Page
Loading...
