51
Performing
Quick Start
4
Press [F3] to confirm your choice.
The “FX SW” screen appears.
fig.Q3-018
5
Press [F1] or [F3] to switch the effects on and off.
[F1] and [F3] act as effects on and off switches. Press [F1] to turn the
ambience on and off; turn the equalizer on and off with [F3].
AMB (Ambience):
The size of the room and the type of walls can be adjusted to modify the
sound.
EQ (Equalizer):
This adjusts the overall tone quality of the drum kit.
6
Press [KIT].
The “DRUM KIT” screen appears.
fig.Q3-018a
Turning these switches off
removes the effects without
influencing any of the other
settings. Before using the
Ambience or Equalizer,
check to make sure that
these switches are set to
“ON”.
These settings can be made
for each individual drum
kit.
To Next Page
Loading...
