59
Modifying a Drum Kit
Quick Start
5
Press [F1 (SHELL)].
The “SHELL” screen appears.
fig.Q4-034
6
Press CURSOR [ ] or [ ] to move the cursor to “HEAD TYPE.”
7
Press [INC/+] or [DEC/-] or rotate the VALUE dial to select the
head type.
Here, change this from “CLEAR” to “COATED” and compare the difference
in sound.
fig.Q4-036
This completes selection of the head material. Next, tune the head.
8
Press CURSOR [ ] to move the cursor to “TUNING.”
9
Press [INC/+] or [DEC/-] or rotate the VALUE dial to adjust the
tuning.
Here, change the setting from “0” to “+30.”
fig.Q4-038
10
Press [KIT].
The “DRUM KIT” screen appears.
fig.Q4-038a
In the “SHELL” screen, you
can make settings for the
shell depth, head type, and
tuning.
To Next Page
Loading...
