Roland VS-2480 - 4 VGA Main Display Universal Elements; VGA Menus; The PROJECT Menu

Roland VS-2480 Owner’s Manual, Version Two Addendum www.RolandUS.com 23
4—VGA Main Display Universal Elements
This chapter describes the areas of the VGA main display that are always visible no
matter how the rest of the display changes. These are the:
• menus • control bar
•PAN/AUX SEND 1-8 knob strip • clipping indicators
•F buttons • status strip
• remaining space status strip
The illustration on Page 20 shows where these elements are located on the VGA.
VGA Menus
The menus at the top of the VGA display give you quick mouse access to all of the
features found in the VS-2480’s onboard menus, and also contain items unique to the
VGA main display. To select an item from a menu:
1. Click the desired menu with your mouse to display the
menu’s contents.
2. Move the cursor over the desired menu item to highlight it in
blue and click the item with your mouse.
An arrow to the right of a menu
item signifies additional choices presented in a
submenu. Hold you mouse cursor over the main menu
item, drag rightward and down to select the desired
item from the submenu and click your mouse.
To close a menu, click elsewhere on the screen or press EXIT/NO.
The PROJECT Menu
The PROJECT menu contains an assortment of options that relate to an
entire project.
Menu item: See Owner’s Manual Page:
NEW 96
RELOAD (See Addendum Page 24)
NAME 99
PROTECT 99
OPTIMIZE 100
SPLIT 103
EXPORT 109
PROJECT LIST 93
STORE (See Addendum Page 24)
SHUTDOWN/EJECT 80