Roland VS-2480 - Transport Buttons; Locator (Loc); Scene (Scn); Scene Name;Number

4—VGA Main Display Universal Elements
Roland VS-2480 Owner’s Manual, Version Two Addendum www.RolandUS.com 31
16. Transport Buttons
17. PREVIOUS/NEXT
18. MARKER (MRK)
19. TAP
20. LOCATOR (LOC)
21. SCENE (SCN)
22. Scene Name/Number
Click:
• ZERO—to return the timeline to the start of the project.
• Rewind—to move the timeline quickly back through the project.
• FF—to move the timeline quickly forward through the project.
• STOP—to halt playback of the project.
• PLAY—to begin playback from the timeline’s current location.
• REC—to begin recording.
Click PREVIOUS or NEXT to move the timeline backward to the most
recent phrase or marker, or forward to the next one, respectively.
Click MARKER to display the Locate to Marker window when you want
to move the timeline to the desired marker, or want to clear a marker.
Your project must contain at least one marker before you open the
Locate to Marker window.
Click TAP to place a new marker at the timeline’s current position.
Click LOCATOR to open the LOCATE window in which you can name,
clear, create, move or jump to locators.
Click SCENE to open the SCENE window in which you can name, store,
recall and configure scenes.
This display shows the number—and if it’s been named—the name of
the last-recalled scene.
RECZERO
Rewind STOP
FF PLAY
Rewind and FF can
move the timeline in
increments as small as
one second.
177
NEXTPREVIOUS
189
188
189
186
145
145