5—VGA Main Display Home Screen
Roland VS-2480 Owner’s Manual, Version Two Addendum www.RolandUS.com 39
Operating the VGA Playlist
Getting Around
You can move through a project using the VGA playlist’s horizontal scroll bar and
buttons, located at the bottom edge of the playlist.
To move quickly through the project, drag the scroll bar in the
desired direction—the size of the scroll bar indicates how much
of the project is currently visible. To move backward by small
increments, click the left scroll button. To move slowly forward,
click the right scroll button.
Use the playlist’s vertical scroll bar and buttons along its
righthand edge to move up or down through the project’s tracks.
To move quickly to a different set of tracks, drag the scroll bar in
the desired direction—the size of the scroll bar indicates how
many of the project’s tracks are currently visible. To move by
smaller increments up or down through the tracks, click the
desired vertical scroll button.
Zooming
The VGA playlist’s zoom buttons allow you to increase or
decrease the magnification of the project’s tracks. The:
• time zoom buttons—determine how much of the project is
displayed. Zoom in to view a smaller area more closely, or
out to view more of the project.
• track zoom buttons—determine how many tracks are
displayed. To show fewer tracks in greater detail, zoom in.
To show more tracks, zoom out.
Another way to zoom is to right-click on the playlist and select
the desired ZOOM item from the Edit Pop-Up menu (Owner’s
Manual Page 241). When you do, a window appears in which
you can select the desired magnification.
You can also use the VS-2480’s standard navigation tools—
the TIME/VALUE dial and current time location display as
well as locators, markers, and so on. (Project markers are
shown as gold downward-pointing triangles above the tracks
in the playlist, as shown on Page 44.)
Scroll bar
Scroll buttons
Time zoom
buttons
track zoom
buttons
Track zoom
Time zoom
Track zoom Time zoom
To Next Page
Loading...
