5—VGA Main Display Home Screen
48 www.RolandUS.com Roland VS-2480 Owner’s Manual, Version Two Addendum
In the LOC/SCN pane, you can quickly store, recall and clear locators and scenes right
from the playlist.
Use the upper half of the pane for locator operations. To:
• change locator banks—click the desired bank’s number.
• store a locator—move the timeline to the desired location and click the number of an
unused locator position.
• recall a locator—click the locator’s number.
• clear a locator—hold down CLEAR on the VS-2480 and click the locator’s number.
Use the lower half of the pane for scene operations. To:
• change scene banks—click the desired bank’s number.
• store a scene—set up your mixer settings as desired and click the number of an
unused scene position.
• recall a scene—click the scene’s number.
• clear a scene—hold down CLEAR on the VS-2480 and click the scene’s number.
The VGA Wave Display
The VGA wave display allows you to view a single track’s audio with the maximum
amount of detail for precision editing operations.
The currently selected track’s number appears at the left of the wave display. To view
other tracks, drag the vertical scroll bar up and down or click the desired vertical scroll
button. To move through the project, drag the horizontal scroll bar or click the
horizontal scroll buttons.
You can zoom in or out by clicking the wave display’s zoom buttons. To zoom:
• vertically—click the desired amplitude zoom button.
• horizontally—click the desired time zoom button.
To name a locator or scene—or perform other locator/scene operations—click the LOC
or SCN buttons (Page 31), respectively.
Click the WAVE DISPLAY button in the lower right-hand corner of
the playlist to open the wave display.
238
Track
number
Track name Phrase name Magnification
Amplitude
zoom buttons
Time zoom
buttons
To Next Page
Loading...
