Rosco Maximizer 2B User Manual

5
Rosco Maximizer 2B Asphalt Distributor
5-21
Component Location
Table 5-7. Run Screen
ITEM NO. CONTROL NAME FUNCTION
1 Burner
The operator can activate the burner using the in-cab control panel. The
control system enables a relay that allows the burner to be ignited from
the back of the distributor. If the temperature should exceed the high
temperature set point (Figure 5-7) in the controller; a relay will turn off the
burner. The burner will also turn off if the distributor ground speed exceeds
5 MPH. Once turned off, the operator must stop the distributor and wait for
the contents of the Tank to cool below the high temperature set point before
attempting to relight the burners.
Return to
Last Viewed
Return to
Thumb Index

Rosco Maximizer 2B Specifications

General

Brand	Rosco
Model	Maximizer 2B
Category	Construction Equipment
Language	English