Rosemount 3491 - Common Practice Commands

Reference Manual
00809-0100-4841, Rev. AA
May 2007
Rosemount 3490 Series
E-2
Common Practice
commands
• #33 Read device variables.
• #34 Write primary variable damping value.
• #35 Write primary variable range values.
• #36 Set primary variable upper range value.
• #37 Set primary variable lower range value.
• #40 Enter/exit fixed current mode.
• #41 Perform self test.
• #42 Perform device reset.
• #43 Set primary variable zero.
• #44 Write primary variable units.
• #45 Trim loop current zero.
• #46 Trim loop current gain.
• #47 Write primary variable transfer function.
• #48 Read additional device status.
• #49 Write primary variable transducer serial number.
• #50 Read dynamic variable assignments.
• #51 Write dynamic variable assignments.