Rosemount 3491 - Section 4 Getting Started

Reference Manual
00809-0100-4841, Rev. AA
May 2007
4-1
Rosemount 3490 Series
Section 4 Getting started
Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-2
Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-3
The Hierarchical menu system . . . . . . . . . . . . . . . . . . . . . page 4-5
Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-9
SAFETY MESSAGES Procedures and instructions in this section may require special precautions to
ensure the safety of the personnel performing the operations. Information that
raises potential safety issues is indicated by a warning symbol ( ). Refer to
the safety messages listed at the beginning of each section before performing
an operation preceded by this symbol.
Explosions could result in death or serious injury:
Verify that the operating environment of the 3490 Series Control Unit is consistent with
the appropriate hazardous locations certifications.
Failure to follow safe installation and servicing guidelines could result in death or
serious injury:
Make sure only qualified personnel perform the installation.
Use the equipment only as specified in this manual. Failure to do so may impair the
protection provided by the equipment.
Do not perform any service other than those contained in this manual unless you are
qualified.