1.3 Service rules
The service standards described in this manual are integral part of the unit's equipment.
These standards are intended for the operator who has been previously and specifically
trained for the conducting of this type of unit and contain all the necessary and essential
information for the safe operating and optimal use of the unit.
Carefully read and follow the following suggestions:
at the time of installation or when interventions on the unit are required, you must observe
the following rules on this manual, follow the directions on-board the unit and apply all
appropriate precautions;
possible accidents to people and things can be avoided following these technical
instructions compiled with reference to the machinery directive 2006/42/EC and
subsequent amendments. In any case, always conform to national safety standards;
do not remove or damage the safeguards, labels and lettering, especially those imposed
by law and, if no longer legible, replace them.
The units were designed and constructed in view of the current state of the art and of the
current technical standards.
The laws, rules, regulations, prescriptions and directives in force for these types of machinery
have been observed.
The materials used and equipment parts as well as production processes, assurance of the
quality and control of the systems meet the highest standards of safety and reliability.
It may be possible to maintain continuous performance and functionality and durability of the
unit by using this equipment for the purposes specified in this user manual, operating them with
due diligence and accurate maintenance and revisions to perfection.
1.4 Reference regulations
By affixing the mark to the unit, the manufacturer declares that the dehumidifiers Ecodry
CN+ 300, Ecodry CN+ 600, Ecodry IN+ 300 and Ecodry IN+ 600 conform to following relevant
safety regulations:
89/391/CEE
To Next Page
Loading...