1.10 Residual risk zones
Residual risk zones:
danger of short-circuit and fire caused by short-circuit;
danger of explosions due to the presence of pressurized circuits and of pollution due to the
presence of refrigerant in the circuit;
danger of burns due to the presence of high temperature piping;
danger of injuries from cuts.
1.11 General safety rules
Wear protective clothing
Each operator must use personal protection equipment such as gloves, protective helmet,
safety glasses, safety shoes, headphones for protection against noise.
Fire extinguisher and first aid
Place a first-aid kit and a fire extinguisher nearby.
Periodically ensure that extinguishers are loaded and make how to use
clear.
In case of fire, use it according to the current regulations and call the fire brigade.
Periodically check that the first aid box is complete.
Make sure emergency telephone numbers for first aid are available nearby.
Warnings for checks and maintenance
Apply a sign that indicates: "UNDER MAINTENANCE" on all sides of the unit.
Carefully check the unit following the list of operations given in this manual.
Safety plates
2. Description of the product
CAUTION:
There are residual risks in some areas of the unit that could not be removed when the unit was
being designed, or delimited with safeguards due to the particular features of the unit. Each
operator must know the risks present in this unit in order to prevent any accidents.
To Next Page
Loading...