Rosslare AC Series User Manual

Operation
22 AC-x32 Series Installation and Programming Manual
 The bell always sounds when the controller's doorbell button is
pressed.
 The door chime can be programmed to sound whenever the
controller unlocks the door (the door chime does not sound when
the REX button is used to open the door).
 The siren can be programmed to sound when the case of the
controller is opened or when the controller is removed from the
wall. The controller can also program the length of the siren in
the BL-D40.
The controller communicates with the BL-D40 using a coded
proprietary Rosslare communications protocol. This provides a more
secure link between the controller and the BL-D40. If the BLD40
receives any unrecognized codes on its communication line, or
communication between the controller and the BL-D40 are severed,
the strobe flashes repeatedly until the communication problem is
resolved.

Rosslare AC Series Specifications

General

Operating Voltage	12VDC
Input Voltage	12VDC
Communication	RS-485, TCP/IP
Output Voltage	12V DC
Enclosure Rating	IP65
Type	Access Control Unit