Royal 220DX - CLEAR MEMORY OPERATION; Initial Clear

7
3 CLEAR MEMORY OPERATION
3.1 Initial Clear
To Perform an All Clear:
The first way:
1. Switch the control lock to the Prog mode.
2. Enter the number “951” on the numeric keypad.
3. Press the [qty/time] key located on the default keyboard layout.
4. The message “InIt SUrE” will display momentarily.
5. Press the [subttl] key to confirm the initialization. (Other function keys to discard)
6. The message “InIt…” will be displayed.
7. When the initial clear is completed, it will print one receipt and the message
“0.00” will be displayed.
The second way:
1. Switch the control lock to Prog mode.
2. Turn the Power OFF.
3. Press and hold [1] [3] [7] [9] keys.
4. While continuing to hold the [1] [3] [7] [9] keys, turn the power ON.
5. The message “InIt SUrE” will display and then releasing these keys.
6. Press the [subttl]to confirm the initialization.(Other function keys to dircard)
7. The message “InIt…” will be displayed.
When the initial clear is completed, it will print one receipt and the message “0.00”
will be displayed.
The receipt format: (Retail Mode)
* * * * * * * ** * * ** * * ** * * ** * * ** *
Work mode RETAIL
Department Num 16
Clerk Num 10
PLU Num 500
All clear is completed!
* * * * * * * ** * * ** * * ** * * ** * * ** *
Note:
The operation will clear all data and make the register return to a factory default state.
Perform this operation only as necessary.