Royal 220DX - TRAINING MODE; To change from Normal Operation mode to the Training mode; To quit the Training mode

55
10 TRAINING MODE
The register provides a training mode for new clerks. After entering the training mode, a
clerk can operate the same transaction entries as those in the REG mode.
1. To change from Normal Operation mode to the Training mode
Condition:
There are no active tables open.
Operation:
1. Turn the Control Lock to the Reg position.
2. Enter the number “000987” by numeric keypad.
3. Press [subttl] key.
Then a trainee can operate all transaction entries described in the REG mode.
All issued receipt will have a training message.
Receipt format:
****************In Train mode******************
Welcome you!
Call again!
* Training *
Item Name Price Qty Total
= = = = = = = = = = = = = = = = = = = = = =
PLU0300 30.30
1 30.30
PLU0600 60.60
1 60.60
PLU0900 90.90
1 90.90
S UB 181.80
C ASH 181.80
Total Qty 3
01-01-2011 #000186 11:36
0001 #000055
Note:
The data in the training mode is not affected any actual sales data in business and the
report total area. But the consecutive number will be still incremented.
2. To quit the Training mode
There are two methods:
The first way:
1. Enter the number “000789” by number keypad.
2. Press [subttl] key.
3. The register will change from Training mode to Normal mode
The Second way:
Changing the control lock to other positions.
Note:
When the register changes to normal mode, transaction entries thereafter will be stored
in the memory.