Allocation is completed!
* * * * * * * ** * * ** * * ** * * ** * * ** *
5.2 Changing to Retail Mode
ECR automatically starts in Retail Mode after the initial clear procedure.
Procedure:
1. Switch the control lock to Prog Mode.
2. Enter “201” by numeric keypad, press [qty/time] key.
3. The message “SUrE” will be displayed.
4. Press [subttl] key to confirm. (Other function keys to discard)
5. User will do the memory allocation.
The following are the default quantity of the below items: (see “Memory
Allocation” for the detailed information)
a. Department Number
b. Clerk Number
c. PLU Number
(The total number of PLUs available values are allocated
automatically, after the previous items are decision. So it cannot
enter manually
.)
6. After the set is completed, press [check] key to allocate the memory.
7. The message “ALLOC SUrE...” is displayed.
8. Press [subttl]key to confirm (Other function keys to discard)
9. When completed, the register will print one receipt, which represents the quantity
for each item.
The receipt format:
* * * * * * * ** * * ** * * ** * * ** * * ** *
To Next Page
