Royal 220DX - Key Layout; Keys Function

3
2.2 Key Layout
The following is the standard keyboard layout, which was initially set at the factory
.
dept
shift
clerk
feed void
7 8 9
4/12
8/16 -%
#/NS
RA Ref/-
4 5
6
3/11
7/15
tax
shift
check
PO. PLU
1 2
3
2/10
6/14
sub
total
charge
C
qty/
time
0 00
1/9 5/13
amt tend
TOTAL
2.3 Keys Function
This chapter will introduce all the keys which the register provided; it includes the
keys that have already been installed on the standard keyboard layout and the
optional keys.
1) [0-9] keys
T
hese keys are used to enter amounts, quantity, percentage, etc. The leading
zeros entered prior to a 1 to 9 are ignored.
2) [00] key
This key is used to enter “00” as numeric key.
If user opens the system flag: [00] is used as [.] key, The key is used for decimal
multiplication, when setting or entering fractional percentage discounts, or when
programming fractional tax rates. Do not use the decimal key when making
amount entries into DEPT or PLUs or tendering.
3) [feed](Paper Feed) key
Simply used for feeding paper. This key is operable in all except LOCK mode. If
user needs to feed paper continuously, depress this key and without release.
Standard Keyboard Layout