Royal 220DX - Check;Charge Key Programming; % Preset; Refund (-) Preset

30
7.9 Check/Charge Key Programming
[check]/[charge]（DESCRIPTOR）[subttl][TOTAL]
Descriptor: Max.12 Characters. See 6.2. Descriptors Inputting section for the detail
info.
7.10 - % Preset
[ - %] （AB）[subttl] （RATE）[subttl] （DESCRIPTOR）[subttl] [TOTAL]/[check]
AB: status
A: Status 1
Code No.
After subttl After Item
+ / -
0 YES YES +
1 YES YES -
2 YES NO +
3 YES NO -
4 NO YES +
5 NO YES -
6 NO NO +
7 NO NO -
Percent Rate: 0.000% - 99.999%
Desc.: Descriptor, Max. 12 characters. See 6.2. Descriptors Inputting section
for the detail information
Note:
When change +/-, the corresponding reports data must be empty.
7.11 Refund（-）Preset
[ref/-]（STATUS）[subttl]（PRICE）[subttl]（DESCRIPTOR）[subttl][TOTAL]
The status is as follows:
Code No. After subttl After Item
0 N Y
1 Y N
2 Y Y
Code No.
Rate Rounding
0
Rounding off
1
Rounding Up
2
Discarding
Repeat if needed
(Max.12 characters)
（6 digits）
B: Status 2