RWD MP-500 - Accessories; Device Conditions

4
1.6 Accessories
Configuration
Name
Quantity
Description
Standard
MP-500 Micropipette Puller
1
Main unit
Standard Power wire 1
Plug-in power wire for device
power input
Standard
Electrode storage box
1
For storing microelectrodes pulled
Standard Double-end screwdriver 1
To disassemble and assemble
accessories. One end is cross and
the other slotted.
Optional
HF-3025B、HF-3030B
HF-2545B heating filaments
3
For heating capillary glass. Users
can choose one for requirements.
Optional
6 kinds of cored glass:
B-15086-10F、B-10050-10F
、
B-10078-10F、B-12069-10F
、
B-12094-10F、B-150110-10F
6 boxes
For pulling microelectrodes. Users
can choose according to common
models.
Standard
Certificate of Inspection
1
/
Standard
Packing list
1
/
Standard
Easy Adjustment Guide
1
/
1.7 Device Conditions
Please prepare the device operating environment under the conditions listed in the table below
to ensure the operation and safety of the device.
Environment type
Description
Operating conditions
Temperature: 5-40 °C
Recommended laboratory temperature: 20-25 °C
Humidity: 10%-80% (non-condensing)
(10%-80% at 31 °C, 10%-50% at 40 °C)
Recommended laboratory humidity:
50%-80%
Storage conditions
Temperature: -20-60 °C
Humidity: 10%-93% (non-condensing)
Pressure: 50 kPa-106 kPa
Power
AC power: 100-240 V AC, 50/60 Hz; maximum power 150 W
Others
Avoid direct sunlight and rain; avoid severe vibration; the
altitude cannot exceed 2000 m; placed on a level and
stable platform