59
Step 3: After around 5 seconds, a short tone will be sounded
and the LED will flash in red.
Step 4: While the LED flashes, press the button again and keep
it pressed for another 5 seconds.
Step 5: After around 5 seconds, the LED will flash in red,
yellow and green. Release the button.
Step 6: Step 6: The device has now been reset and can be
integrated again via the SmartHome software using
the search mode.
Step 7: To integrate the device in the SmartHome software,
please press the button briefly.
Step 8: Re-integrate the device via the search mode or use the
previous settings.
Step 9: Follow the instructions in the popup window and press
the button briefly once again.
Step 10: Step 10: If the device symbol remains greyed out after
the device has been integrated, press the button again
to complete the process.
13 Maintenance and cleaning
The smoke detector is maintenance-free for the user, apart from
the possible need to change the battery.
To Next Page
Loading...