EasyManua.ls Logo

RWE SmartHome - Technical Specifications

RWE SmartHome
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
60
Clean the device with a soft, clean, dry, lint-free cloth. To remove
stubborn dirt, slightly moisten the cloth with lukewarm water.
Do not use any solvent-based cleaning agents because they can
attack the plastic housing and labelling.
14 Technical data
Name of device: WSD
Supply voltage: 4.5 V/3 x LR 6
Radio frequency: 868.3 MHz
Maximum transmission power: 10 mW
Ambient temperature: C to +50°C
Storage temperature: -25°C to +70 °C
Relative humidity: 5 to 93 %, non-condensing
Typical free-field range: Up to 100 m
Internal signal generator: >85 dB(A)/3 m
Protection class: IP30
Battery service life (alkaline):
At least 2 years (typical value, without
alerts)
Dimensions: 120 x 44 mm (D x H)
Technical changes reserved.

Table of Contents