Ryobi RM480e - Product Controls and Labels; Brake, Blade, and Cruise Controls

The following labels are found on the product.
For your safety, review and understand all of
the labels before starting the product.
If any of the labels come off the product or
become hard to read, contact an authorised
service centre for replacement.
DEACTIVATE CRUISE
PRESS accelerator
pedal forward,
press brake or push
“CRUISE” button
Charge indoors only,
do not expose to rain or damp conditions
Push BRAKE pedal DOWN (P)
and raise red handle
Press BRAKE pedal down to
DISENGAGE
RM480e
Techtronic Industries Australia Pty Ltd
Techtronic Industries N.Z. Limited
Ryobi Australia Help line: 1300 697 9624
Ryobi New Zealand Help line: 0508 697 9624
www.ryobi.com.au www.ryobi.co.nz
Made in P.R.C.
48V
Type 2
Drive speed max:3.35m/s
Blade RPM
n 0
270kg;IPX1
Cutting rating power:1500W
Drive rating power:1200W
:3550/min
1
3
2
10