Ryobi RM480e - Know Your Product; Accelerator Pedal

BRAKE
PEDAL
SEAT ADJUSTMENT
LEVER
CHARGING
PORT
APPROVED
HITCH POINT
CUP HOLDER
DECK HEIGHT
ADJUSTMENT
LEVER
SIDE DISCHARGE
CHUTE
BLADE
ENGAGE KNOB
DIRECTION CONTROL
SWITCH
F = FORWARD
N = NEUTRAL
R = REVERSE
CRUISE
CONTROL BUTTON
BATTERY LEVEL
INDICATOR/HOUR
METER
USB PORT
POWER SWITCH
WITH START KEY
MEDIA HOLDER
HEADLIGHTS
PARKING
BRAKE
ACCELERATOR
PEDAL
REVERSE MODE
BUTTON
HEADLIGHT
BUTTON
CHARGER
MULCH COVER
Fig 8
FEATURES
KNOW YOUR PRODUCT
See fig. 8
For safety, read and understand the
information on the product and in this manual.
Familiarise all operating features and safety
rules before using the product.
ACCELERATOR PEDAL
The accelerator pedal controls the speed of
the product.
BATTERY LEVEL INDICATOR/HOUR
METER
The battery level indicator shows the amount
of battery charge remaining. The hour meter
tracks the total number of hours the product
has been used (key in on position) for
maintenance purposes.
BLADE ENGAGE KNOB
The blade engage knob activates or stops the
cutting blades.
Pull the blade engage knob up to activate
the cutting blades. Press the knob to stop the
cutting blades.
NOTE: For cutting in reverse, the reverse
mode button must also be activated.
19