Need help?Do you have a question about the Saab R60 and is the answer not in the manual?
Describes the structure and sections of the user manual, including references.
Lists all documents and standards referenced within the R60 Station User Manual.
Details the operation and LED indicators of the R60 Station's power button.
Explains the R60's front display, its main menu, and status information.
Describes the main menu structure on the R60's front display interface.
Details the status items displayed for the R60 Station, including GNSS and base station status.
Explains the statistics page, showing transmission and reception data over time.
Describes the alarm status display for the R60 base station.
Details status information for Base Station, AtoN, and Receiving Station modes.
Provides information regarding the VHF Data Link (VDL) status.
Details the configuration parameters available via the front display GUI.
Instructions for connecting to the R60 for monitoring and configuration via its web GUI.
Overview of the R60 web interface, its main categories, and navigation.
Explains how to navigate the R60 web interface, including using the navigator line and shortcuts.
Discusses how the web page appearance may vary based on browser window size.
Instructions on how to save parameter changes made in the R60 web GUI.
Details about the HW/SW Info category, covering software, hardware, and license information.
Describes the Monitor category for displaying unit status, alarms, and position reports.
Explains the Configure category for checking and changing R60 Station settings.
Details the Maintenance category for upgrading software/firmware and managing configurations.
Provides a general procedure for setting up a new R60 Station using the web GUI.
Step-by-step guide for setting up base station parameters for the R60.
Explains how to access the HW/SW Info category for system version details.
Details how license keys enable or disable functions in the R60.
Summarizes the functionality available across different R60 versions.
Describes functions that appear disabled or are not configurable via the web GUI.
Explains how to upgrade the R60 station to a different variant via a license key.
Explains how to use the Monitor category in the web GUI for R60 operation.
Details the alarm view, listing and explaining all current alarms for the R60 station.
Details the status view, providing information on GNSS, base station, and hot standby status.
Explains how to monitor position reports from VDL users in list and graphical formats.
Details the Data Log view, showing NMEA data of radio messages and status information.
Describes the scrolling panel displaying the latest 500 AIS messages logged.
Explains the clipboard panel for logging messages to memory and copying to the clipboard.
Details the VDL Link Map for monitoring transmissions and reservations in a grid format.
Displays information for the currently selected slot in the VDL Link Map.
Explains the colors used in the channel grids within the VDL Link Map.
Shows available channels with checkboxes for representation in the VDL Link Map.
Toggles freezing of updates to the channel grids in the VDL Link Map.
Displays channel grids representing transmissions and reservations for selected channels.
Explains that all R60 station settings are in the Configure category.
Details how to edit settings and the importance of saving changes before leaving a page.
Covers general settings for the R60 unit, including identification and radio parameters.
Explains network and TCP/IP settings for R60, including IP addresses and filters.
Details settings for the R60's external interfaces, such as unique ID and COM ports.
Covers settings for position and DGNSS, including position source and self-surveyed position.
Specifies FATDMA slots for transmitting messages on each channel for base stations.
Details slot reservation for base station transmissions via VDL message 20.
Allows specification of channel management regions for worldwide standardized AIS channels.
Specifies Group Assignment messages (Message 23) broadcasted by the base station.
Enables output of VSI and FSR sentences for VDL signal information and frame summary.
Sets up the Third AIS Channel for full base station operation, including filters.
Configures two R60 units for a redundant pair in a hot-standby configuration.
Covers AIS repeater functionality, including message processing and filters.
Contains general settings for the repeater function, like enabling and positioning.
Defines FATDMA slot configuration for repeater usage.
Specifies filtering for repeated messages based on the MMSI of the source.
Defines area filtering parameters for message repetition.
Settings for Aids to Navigation (AtoN) transmission, including target definition and scheduling.
Sets up the R60 to act as an AtoN message repeater, extending AtoN range and report rate.
Configures special AtoN functions, modifying status bits based on external input.
Sets up R60 status transmissions and VDL reboot functionality.
Allows changing the password for configuration and maintenance of the R60 web interface.
Covers saving, importing, and restoring the R60 station's configuration.
Procedure for power cycling the R60 station using the Restart button.
Step-by-step guide to update the R60 firmware and software using the upload tool.
Explains how to download the SNMP MIB file for monitoring the R60 unit.
Defines channel management zones using ACA sentences for AIS channels.
Explains AGA sentences for defining group assignment areas for R60 Base Station.
Describes VDM sentences for sending arbitrary data and preserving VDL link integrity.
Details how the R60 handles VDM input with encapsulated message 17 for DGNSS data.
Statement of Conformity for the R60 VDES Base Station from BSH.
EU-Type Examination Certificate for the R60 Radio Equipment Directive.
Compliance statement for REACH and RoHS regulations for the R60 products.
General| Brand | Saab |
|---|---|
| Model | R60 |
| Category | Recording Equipment |
| Language | English |
To Next Page