Saab R60 - Hardware and Software Information; Introduction to HW;SW Info; License Information; Version Functionality Summary

R60 Station
R60 User Manual
Document Number
Version
Date
7000 120-019
A1
2022-08-10
Page 38 (98)
4 HW/SW INFO
4.1 Introduction
The HW/SW Info category is accessed by opening the R60 start web page (see section
3.3) and then click on “> HW/SW Info”.
This category is used to display version information about various software, firmware
and hardware in the R60 unit.
4.2 License info
The different functions in the R60 are enabled or disabled by a license key. The R60 is
delivered with a license key that enables functions in accordance with what the
customer has ordered, and which determines the variant and P/N of the Base Station.
Variant alternatives are:
 Receiving only
 Aids-to-Navigation only
 Standard
 Full
4.3 Version functionality
The functionality as available in the different versions is summarized below. Available
functionality is presented as part of the HW/SW Info GUI.
Function
Description
Rx
AtoN
Std.
Full
Receive AIS
Reception and output of AIS and ASM messages.
x
x
x
x
Transmit AIS
Transmission of all AIS messages on the VDL link.
-
-
x
x
Independent
Independent base station functionality as
defined in Ref [5].
-
-
x
x
AIS Repeater
Option to have R60 act as a repeater in
accordance with Ref [7], see sections 3.1 and
6.14.
-
-
-
x
Hot Standby
Automatic or manual redundancy connection
ability, see section 6.13.
-
x
x
x
VHF
Transmission
Monitoring
Standby station monitoring of data transmitted
via VHF by active base station
-
x
-
x
Aids to
Navigation
Generation and control of Aids to Navigation
(AtoN) messages, see section 6.15.
-
x
-
x
AtoN
Repeater
Repetition of selected Aids to Navigation AIS
messages, see section 6.16.
-
x
-
x