9 SNMP MONITORING
The R60 VDES base station includes support for SNMP monitoring.
SNMP monitoring can be enabled/disabled using a configuration parameter, see
section 6.4.
There is a management information base (MIB) describing the parameters available for
SNMP monitoring in the R60. The MIB can be downloaded from the R60 unit via the
web GUI; see section 7.4.
All R60 parameters have the same object identifier prefix as the R40:
iso.org.dod.internet.private.enterprises.transpondertech.r40 (1.3.6.1.4.1.26308.3)
To Next Page
Loading...