Information about which alarms are active.
The self-surveyed position taken from the internal GNSS receiver.
Information about VDL loads for channel A.
Information about VDL loads for channel B.
Software version of R60 base station part.
Controller and radio software
Software version of R60 controller and radio parts.
Software version of internal GNSS receiver.
Software version of internal GNSS receiver.
Model type of internal GNSS receiver.
Information of the enabled R60 functions as defined by the license
key.
Information about BSC:
Hot standby mode
Hot standby status
Storage status
Information about which BSC alarms are active.
Table 6-20 – R60 status information messages