Please note that Latitude N must be north of Latitude S, otherwise the
area filter is ignored.
The longitude of position reports must be between the Longitude E and
Longitude W settings to be output to network clients.
When Longitude E is west of Longitude W the area for which position
report are output extends across the 180° meridian.
Enable/disable each individual AIS message by the message type. By
hovering the mouse pointer over the checkbox, a short description of
each AIS message can be seen. When a box is unchecked, all AIS messages
of that type will be blocked and not output to network clients.
Table 6-2 – Network parameters
To Next Page
Loading...