Sacher Lasertechnik Pilot PC - Piezo Driver Option; Piezo Amplifier Output Drive; DDS Function Generator; External Modulation Input (MOD PZ)

Sacher Lasertechnik
Group
User Manual Laser Diode Controller PilotPC 42
Laser Diode Controller PilotPC 4000
Current Source
Drive Current Output
Output Current Range: 0-4000mA
Setpoint Resolution: 1mA
Setpoint Accuracy: ±0.1% of FS
Noise: <50µA RMS
Temperature Coefficient: <50ppm/°C
Short-Term Stability (1 hr.): <20ppm
Long-Term Stability (24 hr.): <50ppm
Preregulator Voltage
Adjustable : 0..7V
Drive Current Limit Settings
Range: 1-4000mA
Resolution: 1mA
Photodiode Feedback
Type: Differential 100R Input
Photodiode Current Range : 0-5000µA Range1
0-500µA Range 2 *
1
External Analog Modulation
Input Voltage Range: -10V..+10V
Transfer Function: 400mA/V
Bandwidth(3dB): 6kHz
Current Coupling Modulation
Low Volt Input analog Range -20..+20V
High Volt Input analog Range -120..+120V
Low Volt Mode Transf: 189..2083 mA/V
High Volt Mode Transf: 32..347 mA/V
(High Voltage Mode = Prescal ON)
Bandwidth(3dB): 6kHz
Laser Current Monitor *
2
Output Voltage Range: 0-10V
Transfer Function: 1V/400mA
*
2
This is Output is not available in the piezo option