Sacher Lasertechnik Pilot PC - Main Menu; LD Current Menu

Sacher Lasertechnik
Group
User Manual Laser Diode Controller PilotPC 23
Main Menu
This menu is just to select level II sub menu.
The jog dial is used to select the submenu and the jog dial button is to
enter the menu.
LD Current Menu
In dependence on the Laser Mode (const current or const. power) the
laser current could be adjusted.
Adjusting the current:
- Press the jog dial until the set value is highlighted
- adjust the current by turning the jog dial (current is immediately
changed)
- Press the jog dial until the set value is not highlighted
Main Menu
Laser
Temperature
Scan
Settings ?
System ?
I-LD: 1234,5 mA
POS I-MODE LIM
TEC -4000 mA
AD590 21,00
°
C
PZ FG CC EM
RM STA 12345
Laser [mA]
SET 1234.5
ACT -1234.5