Sacher Lasertechnik
Group
User Manual Laser Diode Controller PilotPC 50
PZ / Function Generator Sync Output
PZ Sync
The output is used for triggering external devices.
Pin Nr. Signal Name Description
Signal +
PZ SYNC P Modulation Plus
Signal - PZ SYNC M Minus
Piezo Connectors
Piezo Connectors
Both Piezo connectors are internally connected.
They are used to adjust the laser current /power when
current coupling is activated.
Pin Nr. Signal Name Description
Signal +
Piezo + Piezo Signal Plus
Signal - Piezo - Piezo Signal Minus
The counterpart connector is
LEMO FFA.00.250.CPAC29
To Next Page
Loading...