Sacher Lasertechnik
Group
User Manual Laser Diode Controller PilotPC 51
Interlock Connector
Interlock Safety Connector
This connection is used for an external safety switch.
It gives an opportunity to connect an external indicator lamp witch is
switched on by the laser controller when the power stage is active.
The switch is ground free (not connected with the internal electronic).
Pin Nr. Signal Name Description
1 I-Signal Interlock Signal
2 I-GND Interlock Signal
3 I-Contact Switch
4 I-Contact Switch
LINE Connector
Line connector
Standard line connector with voltage selector and fuse case.
1
4
To Next Page
Loading...