SAF Integra-X - Page 48

INTEGRA-X User Manual WEB GUI
SAF Tehnika JSC 48
log event show module {modem|
psu | radio | system | alarm_only |
iman} [last <#_of_entries>] [time
<starttime> [<endtime]]
Use to show entries for a specific module. Regarding
subcommands “last” and “time” refer to commands
above.
log event clear
Use to clear alarm log
log event configure
{enable|disable}
Use to enable or disable event log filter.
log event configure dump <1…60>
Use to configure duration in minutes during which
filter is monitoring repetitions.
log event configure pattern <1…10>
Use to configure a number of log entry repetitions to
be monitored.
log event configure status
Use to display the current configuration of grouped
repetitive alarm-event log entries (filter).