Page 6-74 F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
6-
dvanced parameters
6.4.9
R
outing
This menu contains the following sub-menus:
• Default Gateway (see subsection 6.4.9.1)
• Static Route (see subsection 6.4.9.2)
6.4.9.1 Default Gateway
Object: This menu is used either to allocate dynamically a default gateway address to the router from a
PVC or to enter an address or choose an interface.
• In the Advanced Setup menu, select Routing then select Default Gateway.
The following screen opens:
Default Gateway
Button
Action
Transfer the interfaces selected in the Available Routed W
N
Interfaces area to the Selected Default Gateway Interfaces
area.
Transfer the interfaces selected in the Selected Default
Gateway Interfaces area to the Available Routed W
N
Interfaces area.
To Next Page
Loading...
Need help?
General
