F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Page 6-95
6-
dvanced parameters
6.4.17
Multicast
Object: This menu lets you configure IGMP protocol necessary to use video conferencing and
teleconferencing applications for example.
• In the Advanced Setup menu, select Multicast.
The following screen opens:
IGMP Configuration
Field
Action
Default
value
Default Version
Allows you to set the WAN side version of IGMP
protocol version. LAN side always sends IGMPv3
queries. IGMP proxy/snooping module can handle all
the backward compatibility issues if it receives any
version of IGMP messages.
Note: By default it starts with IGMP version 3.
3
Query Interval Allows you to set the query interval.
125
Query Response
Interval
Allows you to set the query response interval.
10
Last Member Query
Interval
Allows you to set the last member query interval.
10
Robustness Value Allows you to set the robustness value.
2
Maximum Multicast
Groups
This value sets the maximum number of groups
allowed per interface. It can be changed dynamically.
25
To Next Page
Loading...
Need help?
General
