F@ST 2704R Reference Manual - 253526032-A
Sagemcom Broadband SAS document. Reproduction and disclosure prohibited
Page
-5
-
nnex
- Troubleshootin
A.4
Diagnostics
t
o
ol
To access the Diagnostic tool:
1. Open your browser.
2. Enter the router's IP address or enter the following URL: http://myrouter.
3. In the login screen that appears, enter your username and password.
Default values are:
- User name: admin
- Password: etdm
(see the router
sticker)
4. The welcome page of the HTTP configuration tool appears.
5. Select the Diagnostics menu.
6. Click on Test. The connections to the LAN, to your DSL Service Provider and to your Internet Service
Provider are tested step-by-step:
- successful tests are marked as a pass.
- unsuccessful tests are marked as a fail.
Note
Note
Status DOWN means that an interface was not detected (LAN or Wi-Fi).
FAIL test
Depending on the nature of the test, it is possible that operation of the router or
access to the Internet may not be prejudiced. For example if you do a "Ping" either
to an ATM OAM F5 segment or to a DNS primary address.
To Next Page
Loading...
Need help?
General
