Sam4s ER-265EJ - Page 144

144 • Program Mode Programming Sam4s ER-260EJ/256EJ OP Manual v1.20
Option Entry Description
26
HASH IS
NORMAL
NON-ADD
NORMAL: Hash adds to all totals except the gross and
net sales totals on the financial report.
NON-ADD: Hash does not add to any totals, except the
HASH total on the financial report.
27
% IS NOT AFFECT TO
NET SALE
Y or N Select Y not to affect net sale amount.
28
TENDER VALID
AMOUNT
AMT OF
SALE,
AMT
TENDERED
Validation is allowed if an appropriate optional printer is
connected to a Serial port. Here you can choose the
content of single line validation
29
DISABLE CASH
DECLARATION
Y or N Select Y to block the cash declaration function.
30
ALLOW SALE WITH
ZERO STOCK
Y or N
When N, inventory PLU’s cannot be sold when stock
reaches "0".
31
WARNING BELOW
MINIMUM STOCK
Y or N
Select Y to display warning message if current stock value
is less than minimum stock value.
32
STOCK PROGRAM BY
PC/SD/USB
ADD(+)
SUB(-)
REPLACE
Choose ADD(+), SUB(-) or REPLACE to determine
whether the quantity of inventory you enter in the PLU
stock program adds to existing inventory quantity, or
whether it replaces the current inventory quantity.
33
USE X/Z/P/S MODE
PASSWORD
Y or N
Select Y to require password, to provide management
restriction in X, Z, PROGRAM (P) and SERVICE (S)
MODE. (See system option 41 to set password)
34
PRINTER PAPER
SENSOR ACTIVE
Y or N
A built-in paper sensor determines whether paper is
currently loaded in the printer. If Y, operations are not
allowed without paper loaded. If N, operations are
allowed when paper is out.
35
RS-232C PORT POWER
ON
Y or N Select Y to turn ON the Serial port power.
36 STORE NAME 8 Character
Stored files will be saved on SD/USB under a folder with
the store name. Do not include spaces between the name.
37 DRAWER LIMIT 8 DIGIT
You can set a limit for the drawer total. When the amount
of cash in drawer exceeds the limit set here, a warning will
display on the screen. You must press CLEAR to remove
the warning and continue operations. The warning will
continue to appear at the completion of every transaction
until you use the PAID OUT function to remove cash from
the drawer.
Set the drawer limit to 0 to disable the drawer limit
warning.