212 • Integrated Payment Appendix Sam4s ER-260EJ/256EJ OP Manual v1.20
Zero Authorization
Use this operation to verify a credit card is active or not reported as stolen. To use this feature, you
must have a charge key setup to connect to the EFT and type set for credit. You must also have an SD
card installed.
1. Turn the control lock to the Z position.
2. Press 6 and CASH to select the Datatran Transaction menu.
3. Press 4 and CASH to initiate the Zero Authorization.
4. Register displays “PRESS CHARGE KEY”, press the credit card tender key.
5. ECR displays “WAITING FOR EFT”.
6. Insert card into PIN-Pad reader.
7. When verification is complete, a receipt will print on ECR.
Example Verification
VERIFY CARD
VISA ************0010
ENTRY MRTHOD: CHIP
DATE: 11/21/2017 TIME: 09:08:51
INVOICE: 7
REFERENCE: 7
AUTH CODE: 09855A
AMOUNT UDS$ 0.00
= = = = =
TOTAL UDS$ 0.00
APPROVED – THANK YOU
I AGREE TO PAY THE ABOVE TOTAL
AMOUNT ACCOTDING TO CARD ISSUER
AGREEMENT (MERCHANT AGREEMENT IF
CREDIT VOUCHER)
X_______________________________
CARD 01 TEST
APPLICATION LABEL: VISA CREDIT
AID: A0000000031010
TVR: 0000008000
IAD: 06010A03602000
TSI: F800
ARC: 00
CVM: SIGN
Delete SD EMV File
Use this operation to clear the EMVBACK.txt file stored on the SD Card. This is the internally stored
To Next Page
Loading...
