18
DRT582221110
B - 2023/01
Member of Exel group
1.6.5. Recommendation materials
• Our equipment must not be modified or used for purposes not intended. Any modification of the equipment
made by the user and not authorized by Sames will result in loss of certification.
• Parts and accessories must be supplied or approved exclusively by Sames.
1.6.6. Storage conditions
Our equipment must be stored in its original packaging.
In the event of prolonged storage, it is advisable to carry out a preventive maintenance on all lubricants before
commissioning.
Storage before installation:
• We recommend a storage temperature between +0°C / +32°F and +50°C / +122°F.
• Protect the unit from dust, water runoff, moisture, vibration and shock.
• Remove the packaging just before assembly.
Storage after installation:
• Protect the unit from dust, water runoff, moisture, vibration and shock.
1.6.7. Handling
Not applicable
To Next Page
Loading...
