SAMES KREMLIN Xcite - Configuration of Certified Equipment; Marking

7
Member of Exel group
DRT582221110
B - 2023/01
1. Health and safety instructions
1.1. Configuration of the certified equipment
This manual defines the configuration of the certified equipment.
1.2. Marking
1.2.1. Description of the ATEX equipment
Each device is marked with the name of the manufacturer, the device reference and important informations for the
use of the device: air pressure, electrical power.
This equipment has been designed in accordance with the ATEX Directive 2014/34/EU and is intended for use in
Zone 1.
This equipment therefore complies with the following provisions:
• ATEX Directive (2014/34/EU): II 2 G - group II, category 2, gas).
The EU declaration of conformity and the UKCA declaration (specific for the British market) are included in this
document in annexes.