Samson 3374-10 - Serial Interface

EB 8331-4 EN 39
Operation
7.3 Serial interface
The actuator can be congured with the
TROVIS-VIEW software. In this case, the seri-
al interface on the actuator is used to con-
nect the actuator to the computer.
The TROVIS-VIEW software enables the user
to easily congure the positioner as well as
view process parameters online.
TROVIS-VIEW can be downloaded free of
charge from our website at www.samson.de
> SERVICE & SUPPORT > Downloads >
TROVIS-VIEW.
Further information on TROVIS-VIEW (e.g.
system requirements) is available on our
website and in the Data Sheet uT6661 as
well as the Operating Instructions
uEB6661.
Required accessories for connecting the ac-
tuator to a computer
− Connecting cable RJ-12/D-Sub, 9 pin
(order no. 1400-7699)
− USB/RS-232 adapter
(order no. 8812-2001)
− Hardware package consisting of con-
necting cable, modular adapter and
memory pen: order no. 1400-9998
Note
Memory pen-64: order no. 1400-9753
Modular adapter: order no. 1400-7698
Connecting cable: order no. 1400-7699
RS232 RJ12
Adapter: order no. 8812-2001
RS232 USB
Hardware package: order no. 1400-9998,
consisting of:
− Memory pen-64
− Connecting cable
− Modular adapter
Fig.15:Accessories for data transmission