Samson 3374-10 - 13 Memory Pen

72 EB 8331-4 EN
Memory pen
13 Memory pen
The memory pen is optional (accessories) and is used to store and transfer data:
− Memory pen-64 (order no. 1400-9753)
The memory pen can be congured in TROVIS-VIEW. The following functions for the actuator
can be selected:
− Read data from the memory pen
− Write data to the memory pen
− Time-controlled data logging
− Event-triggered data logging
Refer to the operating instructions uEB6661 for TROVIS-VIEW for details on how to cong-
ure the memory pen.
Using the memory pen
1. Open the actuator cover.
2. Insert the memory pen into the serial interface of the actuator.
Î The actuator automatically recognizes the memory pen. The dialog for the memory pen is
displayed. The function (command) selected in TROVIS-VIEW is represented by a code
on the display (see Table7).
3. Select the required action using the rotary pushbutton (depending on the function select-
ed. See Table7).
Î OK is displayed after data transmission is completed.
4. Remove memory pen after data transmission is completed.
Î The memory pen dialog ends. The start screen appears.
Close the actuator cover.