Samson 3374-10 - Adapting the Display; Reading Direction; Backlight

EB 8331-4 EN 43
Operating level
8.2 Adapting the display
8.2.1 Reading direction
To adapt the reading on the display to the mounting situation of the actuator, the display con-
tents can be turned by 180° in Code4.
Code Description WE Adjustment range
4 Reading direction DISP DISP,
DISP
On changing the reading direction, the position of the icons and bar graph reading remains
unchanged, while the segments for numbers, text as well as binary input and output are
turned by 180°:
%
mm
%
mm
S
%
S
mm
%
mm
Default reading direction
Reading direction turned by 180°
8.2.2 Backlight
The display backlight can be changed to be always switched on in Codec93.
Code Description WE Adjustment range
c93 Backlight always on NO
NO
YES
− Regardless of the setting in Code c93, the backlight starts to blink whenever an error oc-
curs (section 15).
− The display backlight can also be switched on and off by the binary input (section 9.6).
Note