Samson 3374-10 - 10 Information Level; Activating Parameters

66 EB 8331-4 EN
Information level
10 Information level
In the information level, all the actuator data important for closed-loop operation are dis-
played. Codes of the information level have an 'i' prex to identify them.
All the parameters of the information level are listed in section17.2.4 on page88.
10.1 Activating parameters
Activate the information level
1. Turn (when the start screen appears) to select Code 11.
2. Press to activate the information level.
(display: i01).
Activating parameters
Î Turn
to activate the required code.
In this example:
Code i01, Lower range value of input signal (the
icon
stands for the mA unit).
Exit information level
1. Turn
to select the code i00 (ESC).
2. Press to exit information level.