90 EB 8331-4 EN
Decommissioning and disassembly
Code Parameters Display/selection
(select ESC to cancel)
Section
d42 EEPROM error: Manufacturing parameters
u Read only
E RD (read error)
E WR (write error)
15
d43 EEPROM error: Transit time
d44 EEPROM error: Status messages
d45 EEPROM error: Statistics
Test – Actions
d51 Start zero calibration ZER 11.2
d52 Start initialization INI 8.3
d53 Perform reset RES 11.4
d54 Load default settings in actuator DEF 11.5
d55 Testing the display TEST (all segments displayed) 11.6
Test – Transit time
d61 Start transit time measurement RUN 11.7
d62 Measured transit time
u Read only in s 11.7
d63 Measured travel
u Read only in mm 11.7
d64 Speed level during measurement
u Read only
NORM (normal), FAST (fast)
11.7
d00 Exit level > ESC
Other parameters of the service level can viewed in the TROVIS-VIEW software.
Tip
To Next Page
Loading...
