Samson 3730-4 - Page 51

EB 8384-4 EN 51
Attachment to the control valve – Mounting parts and accessories
Table5: Attachment to rotary actuators (Fig.10 and Fig.11) Order no.
Mounting
parts
Attachment acc. to VDI/VDE 3845 (September 2010), see section15.1 for details
Actuator surface corresponds to xing level 1
Size AA1 to AA4, version with CrNiMo steel bracket 1400-7448
Size AA1 to AA4, heavy-duty version 1400-9244
Size AA5, heavy-duty version (e.g. Air Torque 10 000) 1400-9542
Bracket surface corresponds to xing level 2, heavy-duty version 1400-9526
Attachment for rotary actuators with max. 180° opening angle, xing level 2
1400-8815
and
1400-9837
Attachment to SAMSON Type3278 with 160/320 cm², CrNiMo steel bracket 1400-7614
Attachment to SAMSON Type3278 with 160 cm² and to VETEC TypeS160, Type R and
Type M, heavy-duty version
1400-9245
Attachment to SAMSON Type3278 with 320 cm² and to VETEC TypeS320, heavy-duty
version
1400-5891
and
1400-9526
Attachment to Camex II 1400-9120
Accessories
Connecting plate (6)
G
¼
1400-7461
¼
NPT 1400-7462
Pressure gauge bracket (7)
G
¼
1400-7458
¼
NPT 1400-7459
Pressure gauge mounting kit up to max. 6 bar (output/supply)
St. steel/brass 1402-0938
St. steel/st. steel 1402-0939
Table6: General accessories Order no.
Reversing amplier for double-acting actuators Type3710
Cable gland M20x1.5,
Black plastic (6 to 12mm clamping range) 8808-1011
Blue plastic (6 to 12mm clamping range) 8808-1012
Nickel-plated brass (6 to 12mm clamping range) 1890-4875
Nickel-plated brass (10 to 14mm clamping range) 1922-8395
Stainless steel 1.4305 (8 to 14.5mm clamping range) 8808-0160
Adapter M20x1.5 to ½NPT
Powder-coated aluminum 0310-2149
Stainless steel 1400-7114
Retrot kit for inductive limit switch 1 x SJ2-SN 1402-1770
Cover plate with list of parameters and operating instructions
DE/EN (delivered state) 1990-0761
EN/ES 1990-3100
EN/FR 1990-3142
TROVIS-VIEW6661 with Type3730-4 device module