Samson 3730-4 - Page 52

52 EB 8384-4 EN
Attachment to the control valve – Mounting parts and accessories
Table6: General accessories Order no.
Serial interface adapter (SAMSON SSP interface to RS-232 port on a computer) 1400-7700
Isolated USB interface adapter (SAMSON SSP interface to USB port on a computer)
including TROVIS-VIEW CD-ROM
1400-9740
Table7: Attachment of external position sensor Order no.
Template for mounting position sensor on older mounting parts. See note on page40 1060-0784
Direct attachment
Mounting parts for actuators with 120 cm². See Fig.15 (left). 1400-7472
Connecting plate (9, old) with
Type3277-5xxxxxx.00 Actuator
G
1
/
8
1400-6820
1
/
8
NPT 1400-6821
Connecting plate (new) with Type3277-5xxxxxx.01 Actuator (new)
1)
1400-6823
Mounting parts for actuators with 175, 240, 350, 355 and 700cm². See Fig.15
(right).
1400-7471
NAMUR attach-
ment
Mounting parts for attachment to NAMUR rib using L or XL lever. See Fig.16. 1400-7468
Attachment to
Type3510 Micro-
ow Valve
Mounting parts for Type3271 Actuator with 60 cm². See Fig.17. 1400-7469
Attachment to
rotary actuators
VDI/VDE 3845 (September 2010), see section15.1 for details.
Actuator surface corresponds to xing level 1
Size AA1 to AA4 with follower clamp and coupling wheel,
version with CrNiMo steel bracket. See Fig.18. 1400-7473
Size AA1 to AA4, heavy-duty version 1400-9384
Size AA5, heavy-duty version (e.g. Air Torque 10 000) 1400-9992
Bracket surface corresponds to xing level 2, heavy-duty
version
1400-9974
SAMSON Type3278 with 160 cm² and VETEC TypeS160 and TypeR, heavy-
duty version
1400-9385
SAMSON Type3278 with 320 cm² and VETEC TypeS320, heavy-duty version
1400-5891
and
1400-9974
Accessories for
positioner
Connecting plate (6)
G
¼
1400-7461
¼
NPT 1400-7462
Pressure gauge bracket (7)
G
¼
1400-7458
¼
NPT 1400-7459
Pressure gauge mounting kit up to max.
6 bar (output/supply)
Stainless steel/brass 1402-0938
Stainless steel/stainless steel 1402-0939
Bracket to mount the positioner on a wall (Note: The other fastening parts are to
be provided at the site of installation as wall foundations vary from site to site).
0309-0184
1)
Only new connecting plates can be used with new actuators (Index 01). Old and new plates are not interchangeable.